Skip to main content

RSE Series

RSE

RSE is an enclosed housing slew drive with IP55 rated seal for enclosure protection. This is a drop fit model for the RSO series, but with an enclosed housing. An externally geared slew ring with heated treated teeth meshes with a globoid worm shaft allowing 5 teeth to be in contact at any point during rotation. Meshing the slew ring’s straight hardened helical teeth with globoid worm allows for better back holding torque. 

Standard imperial drives are designed with a standard 1” 6B spline on the right- hand side of the worm shaft input and a 24mm hex head on the left-hand side for manual rotation. Standard metric drives are designed with a 25mm keyway on the right- hand side of the worm shaft input and a 24mm hex head on the left-hand side for manual rotation.

Worm shaft inputs can be altered during manufacturing to support customer requests for specific motor output shaft dimensions as well right- hand side and left-hand side orientation.

Performance Parameters
  1. High Back Holding Torque
  2. Light Weight
Recommended Applications
  1. Vacuum Trucks
  2. Truck Mounted Cranes
  3. Forestry Equipment
Part Number
Drive Ratio (n:1)
Effciency (%)
Nominal Torque (lbf.ft)
Maximum Torque (lbf.ft)
Holding Torque (lbf.ft)
Tilitng Moment (lbf.ft)
Static Radial (lbf)
Static Axial (lbf)
Dynamic Radial (lbf)
Dynamic Axial (lbf)
Self Locking
RSE314-X04-RI
61
40
5,400
6,516
25,800
25,000
30,350
76,000
15,960
18,210
Yes
RSE435-X04-RI
85
40
7,520
9,078
31,860
49,930
49,900
124,770
26,300
29,900
Yes
RSE523-X00-RI
102
40
11,134
13,300
48,015
100,013
87,900
219,640
46,085
52,830
Yes
RSE639-X04-RI
125
40
17,300
22,500
78,000
150,000
143,880
359,240
75,530
86,320
Yes
RSE760-X04-RI
150
40
26,000
33,426
105,100
217,950
187,000
492,300
92,400
116,230
Yes
Do You Have A Specific Project In Mind?
Request consultation